Discharging by weight - Model T3.
The Loss-in-Weight big bag discharger allows total control over the amount of product to be dispensed from the bag. This can be varied for individually selected batch amounts, or fully interfaced with plant process for continuous batch production requirements.
The T3 model incorporates all the proven features of the Universal, with the bag support dish mounted on load cells.This enables highly accurate weighing of product as it is discharged from the bag.
If necessary, the integral transfer conveyor can also be suspended from the weigh frame as shown in the picture below to provide a totally self-contained discharge and loss-in-weight dispensing unit.
 |
 |
Batch control:
A specialised batch controller provides both 'big' and 'trickle' feed for loss-in-weight dispensing. The Pause-Resume feature pauses the discharging operation when one big bag is empty and retains in memory the amount dispensed. When a fresh big bag is placed on the discharger, the controller recalls the remaining weight required and resumes discharging.All components, including the big bag conveyor are 'above' the load cells and are weighed, while the lower frame is isolated from the load cells and secured to the floor.
Features:
- Full dust control.
- Batch or continuous weight control.
- Bag tensioner ensures complete emptying of bag contents.
- Integral conveyor feeder.
- Designed to discharge poor flowing materials.
- Recipe management system.
- Suitable for all bulk bag types and sizes up to 2 metres high and 2 tonnes in weight.
- Quiet operation (no vibrators).
Options:
- Bag massagers to aid flow.
- Bag spout closure bars for dust-free and easy untying and re-tying of bag.
- Liner remover.
- Mobile frame.
- Sack tip door.
.gif)