USA: (1) 704 246 0900  UK: +44 (0)1200 422525

Search the Blog

Subscribe to never miss a new article!

Download Your E-book on Everything You Need to Know About Flexible Screw Conveyors
New Call-to-action

Why You Should Never Under Estimate the Importance of Accurate Weighing

Posted on 7th September 2017 by

In any business it is important to maximize efficiency to ensure sustainable growth and continuity. Accurate weighing is one area that can often be improved. A slight overfill in one day may not be considered significant, however, if this overfill consistently occurs over a year, you may be giving a significant amount of your product away for free.

Bulk Bag Filling


Did you know that if you sell your product in a bulk bag at a standard weight per bag, then it is very likely that you are overfilling? This is often done intentionally so that customers are not unintentionally short changed. But do you know how much you are giving away for free and do you have control over it? If the answer is NO, then here is what you can do:

First ask yourself how much is your average overfill? It could be 10, 15 or 25 lb. (5, 7 or 12 kg), but we have also seen extreme overfills of 290 lb. (130kg) over target weight. It is critical that you learn how much over your target weight you are filling your bags before improvements can be made.

This can be a scary place to start, but be assured that it is not difficult to minimize the average overfill of 2 – 5 lb. (1 – 2 kg).  For example, if your current overfill is 10 lb. (4.5kg) and you reduce it to 2 lb. (900g), the 8 lb. (3.6kg) difference is put into the next bag and paid for instead of being given away.

This simply makes good financial sense.  This small improvement will show up as incremental recovered revenue, which goes straight to the bottom line as incremental profit.


Take note of these four key factors to help you rethink and rework your bulk bag weighing system. By doing so, you will improve your weighing accuracy and significantly improve your profitability.

1. Consistent product flow:

Any batch weighing application’s accuracy increases as the consistency of the product flow rate increases. This refers to the flow rate during a batch and from batch to batch. Bulk bag fillers typically have a weighing algorithm that includes an “in-flight offset” program that ‘learns’ when to stop product flow ahead of reaching the weight target. This is to compensate for product that is falling between the metering device and the bulk bag. The more consistent the flow, the better the algorithm is able to fine tune the system.

2. Metering device:

Weighing accuracy is critically dependent on how well suited the metering device is to the application. A simple, two-position slide gate valve may provide adequate accuracy when filling bulk bags with reasonably low bulk density product at a slow rate.

However, when filling a high bulk density product at a high rate a conveyor/feeder may be required to achieve the desired accuracy. The ultimate accuracy of a positive displacement type metering device (e.g. screw conveyor, screw feeder, rotary airlock, etc.) is limited to +/- the weight of product in one flight or pocket. Therefore, high bagging rate applications require great care in selecting the best metering system. A conveyor sized to provide a high flow rate necessary to achieve the desired bagging rate may not be able to produce adequate weighing accuracy because it is too large. In that case, a different metering device, a second dribble feed device or a surge hopper with a fast-acting slide gate valve may be required.

3. Dead Load:

The weight that the weighing system sees before product is added to the bulk bag is called the dead load. Gross weighing systems – those that weigh the entire bulk bag filler along with the product in the bag – can see a dead load of + 2,000 lb. (+900kg) depending on the filler and its configuration. Bulk bag fillers that use hang weighing see a dead load equal to a few lb. (kg). This means the hang weighing filler can use smaller load cells or that the portion of the load cell span taken up by the dead load is much smaller. Either way, higher weighing resolution and more accurate weighing is the result.

4. Weighing system minutiae:

Filling bulk bags the specific type of load cell, controller/PLC resolution, scan time and the like are really not significant factors in achieving weighing accuracy. In our experience any weight controller and PLC implementation has more than enough resolution to achieve the desired bulk bag weighing accuracy.

With this knowledge on improving weighing accuracy, stop giving away free product and start gaining profit on your bottom line.


If you have any questions or would like advice, please do not hesitate to contact us. We have been in the bulk material handling industry for more than 45 years and are happy to work with you to improve your weighing accuracy.

(1) 704-246-0900             +44 (0) 1200 422525

Bulk Bag Filling

New Call-to-action

The following two tabs change content below.

Catherine Podevyn

Marketing Director
Catherine has been a director of Spiroflow for over 35 years and is a founder member of SHAPA (Solids Handling and Processing Association). She has published articles and technical papers on many aspects of bulk powder and ingredients handling, including industry guides on comparative conveying methods and more recently on the lifetime cost of equipment. Since the early introduction of bulk bags she has also been instrumental in promoting their adoption throughout process industry through the use of hygienic and controllable filling and discharge systems.